SWA 10 Differential Pressure Probe


SWA 10 Differential Pressure Probe


SWA 10 is an air differential pressure probe that is used on Swema 3000 instead of the built-in or sensor in Swema 3000md or mdH+. Swema 3000 can calculate air velocity and air flow. SWA 10 is also used with a leakage tester together with Swema 3000md or 3000mdH+.

SWA 10 has an inbuilt valve that zero checks the pressure. SWA 10 has two holders attached so it can be fitted on any Swema 3000.

With a pressure range between -300 and 1500Pa, and a maximum overload of ±20,000Pa, SWA 10 has an accuracy of ±1% of the read value, with a minimum of 0.3Pa measured pressure, with accuracy of 95% in non condensing, non moist air, <80%RH, non aggressive gases.

The temperature dependence of SWA 10 is 0.2Pa/°C with displayed outputs in units: 1 mV/Pa and 100mV/m/s, and has a temperature operating range between 0°C and 50°C.

This air differential pressure probe is tested in accordance to the European Standards EN 50081-1 and EN 50082-1: Generic Standards for the Industrial Environment, and it is recommended to calibrate the probe annually.

System Accessories:

  • Silicone / squeezable hose.
  • Static Tube 280mm.
  • Tube connector.
  • Pitot static tubes [ (284mm, Ø4mm), (479mm, Ø4mm), (768mm, Ø4mm) & (1199mm, Ø4mm) ].
  • Tube hook.


Item Number : 761430