Airtightness is the measure of how much air leakage there is from a building. This is determined by carrying out an airtightness test, and the figure obtained from the testing is the air permeability value.
Air leakage can be measured by pressurizing or depressurizing the building to see how much air flows in or out of the building at a given pressure. Air tightness tests are useful to architects, building services designers, energy assessors, builders, services installers, fire sealers, air tightness testers, building controllers, building owners/ occupiers, etc. Airtightness testing is the best way to assess the performance of the building fabric in stopping the uncontrolled passage of air. It is also a very effective method of locating air leakage paths in a completed building.
This 4-day course provides the theory behind airtightness testing as well as hands on training. It culminates in a three-part examination which, when passed, will enable delegates to begin the process of registration. The practical demonstrations and practical exam on this course are carried out using Minneapolis blower door equipment.
A 4-day Training Course
The course is built around the ATTMA Technical Standards. These can be downloaded from ATTMA.These specify the standards that airtightness testers are expected to achieve in their work and hence the knowledge and skills taught on the SALIMUS course.
The course will provide sufficient theory and practice to enable delegates to test buildings using Minneapolis blower door equipment, pass the examinations and begin the registration process.
Delegates will have an overall understanding of technical standards, the use of Blower Door Equipment and how to interpret the test results provided by that equipment.
Anyone who either intends to undertake airtightness testing or who is already doing so.
|ATTMA – Air Tightness Testing Training – Level 1||4 Days||08/02/2021 to 11/02/2021|
Delegates will be invited to return at specific times during day 4 and should allow a minimum of 4 hours for the examination.
Please note that to successfully complete this course delegates must pass all modules in the examination. Should a delegate be unsuccessful they will be invited to return to SALIMUS at a later date to re-take the module(s) they were unsuccessful in completing. There is no opportunity to retake the module(s) on the day of the examinations.
Delegates are provided with a training pack containing a copy of the slides, a copy of the relevant Approved Document or Technical Handbook.
Delegates should bring a scale rule and a calculator. Delegates may wish to bring a laptop, although this is not compulsory.
subsequent delegates. The cost of the initial review is included in this fee.
|Course Name||Duration||Schedule||Details / Registration|
|ATTMA – Air Tightness Testing Training – Level 1||4 Days||14/12/2020 to 17/12/2020||View details|
|ATTMA – Air Tightness Testing Training – Level 1||4 Days||11/01/2021 to 14/01/2021||View details|
|ATTMA – Air Tightness Testing Training – Level 1||4 Days||08/02/2021 to 11/02/2021||View details|